高速安全岛模具无论是在室外保存或者室内保存都应该按照形状和大小的不同来进行分隔
开，将其整齐的堆放在地面上，同时堆放的高度也不能超过2.3米，不能有乱摆乱放的情况
出现，在这个期间，为了防止钢模具出现质变的情况，可以在表面涂上一层防锈剂进行保
护，如果出现局部脱落的情况应该及时进行补填。高速安全岛模具做为一种节能环保的重
要产品，它的优势除了能够循环利用，生产过程不会对环境造成影响，失效之后还能够进
行回收。
High-speed island molds should be stored either outdoors or indoors, separated
by shape and size, stacked neatly on the ground, and no more than 2.3 meters
high, in this period, in order to prevent the steel mold quality change, can be
coated with a layer of anti-rust agent for protection, if there is a local fall
out of the situation should be filled in a timely manner. As an important
energy-saving and environmental protection product, the high-speed safety
island mould has the advantages of recycling, no environmental impact in the
production process, and recycling after failure.
安全岛模具主要是应用在我们的高速工程的建设当中，通过该模具生产出来的收费岛用于
我们的高速路口当中，该模具整体使用起来比较方便，生产出来的混凝土制块成型效果非
常的好，呈现一个帆状，样式比较独特。该模具整体生产比较简单，样式没有太多的变化
，规格变化可以根据客户的设计图纸来进行定制。
The Safe Island mould is mainly used in the construction of our high-speed
projects. The Toll Island produced by the mould is used in our high-speed
intersections. The overall use of the mould is relatively convenient, the
production of concrete block molding effect is very good, showing a sail-
shaped, more unique style. The overall production of the mold is relatively
simple, not too many changes in style, specifications can be customized
according to the customer’s design drawings
安全岛模具是一种组合式的钢模具，既可以采用现场浇筑的生产方式，也可以采用预制生
产的方式来进行收费岛的生产。安全岛模具顶端为一个锥形，能够很好的起到防撞的作用
，在车辆撞上收费岛的时候能够起到较好的缓冲作用，使车辆的速度降下来，并且模具尖
端的这个设计也可以使收费站上的人和驾驶人员更好的观察到对方，使前方的视野更加开
阔。模具一般还会分为岛头以及岛尾两个部分，在生产的时候需要进行进行组装使用，比
对好安装的位置之后进行混凝土的浇筑就行，并对其进行振捣，使内部的浆料充分的凝结
在一起，密度增大形成比较完美的混凝土制块就完成生产任务了。
The mode of production is a modular steel mold that can be either cast on site
or fabricated to produce a toll island. The top of the safety island mould is a
cone, which can play a good role in preventing collision, and can play a better
buffer role when the vehicle hits the toll island, so that the speed of the
vehicle will be reduced, and the cutting edge of the mold design can also make
the toll station and the driver better observe each other, so that the front of
the field of vision more open. The mould is usually divided into two parts: the
head of the island and the tail of the island. When the mould is manufactured,
it needs to be assembled and used. After comparing the position of the
installation, the concrete can be poured and the mould can be vibrated, so that
the internal slurry fully condensed together, the density increases to form a
more perfect concrete block on the completion of the production task.
